WHAT WE NEED TO HELP YOU FIND A PART
- E-mail some pictures (if possible, an unbroken part front & back views) & basic dimensions if you have them.
- Such as wheel diameter, glass hole size & distance form the edge of the glass. Seal dimensions & glass thickness.
- For seals, send a photo of the end 'profile' with any relevant measurements - see additional info below
EMAIL to info@showerdoorparts.co.uk
- We strongly advise you read the additional information below
- It is generally impossible to answer most parts queries over the phone.
- We aim to answer all queries by the end of the next working day
Frequently Asked Questions
Where possible, we have tried to link known brands with suitable replacement parts. Often the original part. So if you can see
your brand here, that is the best place to start. Otherwise please read on.
It looks the same so is it the right part? Very likely, but it is still better to do some basic measurements.
I cant see anything the same, will another one work? Yes, but only if the measurements are correct.
ORDERING WHEELS & ROLLERS
A. Wheel Diameter - often interchangeable 23.5 for 25mm etc.
B. Glass Thickness - most rollers cover a range or thicknesses.
C. Distance of the hole from the edge of the glass.
D. Hole Size (diameter) of the hole (generally a roller for an 8mm hole will also fit 10mm etc).
E. Distance of wheel from outside of glass. Generally little variance and only occasionally necessary.
|
|
Some Key Points
- If in doubt of any of the key sizes and where drop down options are available. Choose the larger wheel option & the larger glass hole option.
- Still not sure? You can send in a picture of your part to showerdoorparts@gmail.com. We may ask you to send in the part itself. If so, it needs to be complete and with your contact details, (if we are not able to match it and you want it returned include a self addressed envelope). PLEASE DO NOT send parts in unless we ask you to do so.
ORDERING SEALS & GASKETS
Fig 1- Distance from base of glass to shower tray, tiles or bath. Measure in mm.
Fig 2- Glass thickness. Shower glass generally has a chamfered edge. Be careful to measure the total width.
Key Points
All seals are either push on, or slot in. They do not require the use of silicone or adhesive.
Most seals are available for glass thickness's of 4-10mm. (Some also in 12mm).Choose from the drop downs for each product.
All product descriptions have a detailed technical diagram. Please compare to your own measurements.
|
|
In Summary
Finding a seal that will work for you will involve some basic measurements and a little browsing to see what type may best suit your application. We have categorised our seals by where they fit, this should be a good guide as to appropriate application.
|
|
|
|
|